Medical Devices

Accessories

  • Cauter Forceps
  • Cautery Electrode Tip and Loop Types
  • Cautery Pedals
  • Cautery Pencils
  • Cautery Plate Connecting Cables
  • Disposable Cautery Plates
  • ECG 10 Lead Cables
  • ECG Cables
  • ECG Leads
  • Electrosurgical Bipolar Cables
  • EtCO2 Cable and Sensors
  • Humidifier Sensor and Connecting Cables
  • IBP Connecting Cables
  • IBP Sets
  • Incubator Accessories
  • Incubator Air Probes
  • Incubator Temperature Probes
  • Mask and Circuits for Anesthesia Machines
  • Medical Batteries
  • Medical Lamps
  • NIBP Cuff Hose and Connector
  • Nst (Fetal Monitor) Probes
  • Nst Belts
  • Oxygen Sensors for Anesthesia Machines
  • Reusable Cautery Plates
  • SpO2 Connecting Cables
  • SpO2 Disposable Probes
  • SpO2 Reusable Probes
  • Temperature Probes for Skin and Rectal Use
  • Ventilator Exhalation Valves
  • Ventilator Flow Sensor Connecting Cables
  • Ventilator Flow Sensors
  • Ventilator Oxygen Sensors
  • Ventilator Test Lung
  • Consumables

    PATIENT BEDSIDE MONITORS


    [1 ]

    GENERAL INFO ABOUT PATIENT BEDSIDE MONITORS

    What is Patient Bedside Monitor

    Patient Bedside monitors are used for observation of a disease, condition or one or several medical parameters such as NIBP, IBP, SpO2, ECG over time for neonatal and pediatric patients

    Working Principle of Patient Monitor

    Usually, Patient Bedside monitors measure and tracks NIBP, ECG, Temperature and SPO2 parameters
    3 or 5 lead electrode is used in ECG. It also can be used for respiration tracking .
    Pulse oximetry is a noninvasive method for monitoring a person's oxygen saturation (SO2). Its reading of SpO2 (peripheral oxygen saturation) is not always identical to the reading of SaO2 (arterial oxygen saturation) from arterial blood gas analysis, but the two are correlated well enough that the safe, convenient, noninvasive, inexpensive pulse oximetry method is valuable for measuring oxygen saturation in clinical use.
    The term NIBP, for non-invasive blood pressure, is often used to describe oscillometric monitoring equipment. It uses a sphygmomanometer cuff. The cuff is inflated to a pressure initially in excess of the systolic arterial pressure and then reduced to below diastolic pressure over a period of about 30 seconds. When blood flow is nil (cuff pressure exceeding systolic pressure) or unimpeded (cuff pressure below diastolic pressure), cuff pressure will be essentially constant. When blood flow is present, but restricted, the cuff pressure, which is monitored by the pressure sensor, will vary periodically in synchrony with the cyclic expansion and contraction of the brachial artery,
    For Measuring body temperature, thermistors are used. A Thermistor is type of resistor whose resistance is dependent on temperature

    Patient Monitor Accessories

    There are accessories provide connection between the monitor and the patient which are ECG cables and electrodes, NIBP hose, connector and cuff, SpO2 connector and probe(disposable or reusable), Temperature probes.

    Usage Area of Patient Monitor

    Patient Monitors are used in Clinics, Operation Rooms, and Intensive Care Units.

    Instructions for Patient Monitor

    Plug the device into power line.
    Swtich On/Off button to turn on device.
    Set ECG, SpO2, NIBP and Temp parameters on menu using Encoder button
    Plug ECG, SpO2, NIBP and Temp probes into sockects on right side of device
    Place ECG electrodes onto baby's body. Make sure each one of the electrodes are positioned correctly
    Put on NIBP cuff to baby's arm. Then blood pressure meausurement can be used manually or automaticly
    Place SpO2 probe to baby's finger .
    You can freeze the screen and inspect parameters by using freeze button
    By holding 3 seconds to Encoder button, you can enter the menu.

    Patient Bedside Monitors - Fiyatlar

    Döviz kurundaki hareketlilik nedeniyle maalesef sitemizden fiyat paylaşımı yapamıyoruz.

    Lütfen fiyat taleplerinizi telefon, e-mail ve iletişim formu yolu ile isteyiniz.

    Patient Bedside Monitors hakkında fiyat talebiniz için aşağıdaki formu doldurabilirsiniz.

    Lütfen kurumsal bir e-posta adresi veya sabit telefon giriniz. Aksi halde mesajınız dikkate alınmayacaktır.

    Denizler Medikal San. ve Tic. A.Ş.
    Küçükbakkalköy Mah.Yüksel Sok. No:5 Coşkun Metal Apt. Kat:3 D:8 Ataşehir / İSTANBUL
    Phone: 0216 577 52 22   |   Faks: 0216 577 52 21
    info@denizlermedikal.com